The V-data Timecode Reader Model TCR decodes IRIG-B timecode and displays the time on the PC screen. It also allows the PC clock to be synchronized with IRIG-B time and shows the millisecond error between the PC clock and the incoming IRIG-B at any moment. The TCR is optimized for use with the V-data TCG but will also work with generic sources of IRIG-B at nominal 3V peak-peak level. There is a BNC connector for IRIG-B, a DB9M connector for the TCG, and a USB connector for the PC. The latest software version is available for free download below under software. Requires XP, Vista, Windows 7, or Windows 8 Operating System and a USB port. USB drivers for TCR hardware can be downloaded from FTDI's website: Windows 32/64 bit D2XX drivers.

Price $245.00 (Special Introductory Price)

The V-data Timecode Generator Model TCG is a crystal controlled IRIG-B Timecode source which will synchronize with 1 microsecond accuracy to GPS receiver outputs when available, otherwise reverting to coast or fail-safe mode. Available with internal GPS receiver/antenna, or compatible with external GPS receiver/antenna Models GPS-18xLVC and GPS-17xHVS below under accessories. For information on product enclosure, please go to CircuitShell.com.

(See downloads for instructions and files needed to upgrade the firmware in the GPS-18x internal or external receivers used with the V-data TCG. The firmware upgrade will resolve date errors caused by the GPS roll-over.)

This Video Encoder/Decoder is optimized for general purpose precision time and event stamping in Encode Mode, and video motion analysis in Decode Mode. Time input is IRIG-B from the TCG product above, or GPS from an external GPS Receiver/Antenna such as Models GPS-18x or GPS-17HVS below under accessories.

price $1375

This is a multi-channel version of the VED-I. Features up to 10 video channels and desktop or rack-mount enclosure. Time input is IRIG-B or GPS.

Price $5100 for 5 channels

This is a flash bulb sequencer for extended high-power illumination. It fires 8 flash bulbs at 1-99 ms intervals after a trigger and 0-99 ms delay. Units can be cascaded for additional illumination time. Can optionally be configured as an electronic flash sequencer with appropriate intervals and delays.

Price $1245

This five-channel Adaptive Video Amplifier automatically adjusts video levels back to the standard 1V p-p into a 75 ohm termination. Useful for correcting attenuation problems due to long lines and misadjustment. Can also be configured as a video distribution amplifier. An optional rack-mount panel holds two AVA units.

Price: $935

This Video Encoder/Decoder is optimized for moving vehicles and inserts full GPS data and precision time in Encode Mode. In Decode Mode, GPS data is reconstructed and output in moving-map compatible NMEA form. Time input is GPS.

This Global Time and Position unit is a IRIG-B timecode generator which synchronizes to an internal or external GPS receiver. Features include programmable IRIG user bits, LED drivers, GPS serial and pulse-per-second outputs, and serial output event capture.

This Light Event Detector detects infrared light pulses from muzzle flashes, lightning, laser, and other sources with wavelengths out to 1.3 microns. Powered by the user interface or the optional Signal Conditioning Unit (SCU)

This Signal Conditioning Unit (SCU) can be used to power and control the LED-1 or as a general purpose closure-to-pulse converter. It features automatic or manual reset and selection of various pulse amplitudes or closure output.

This Video Sync Generator generates two composite video sync outputs synchronized to either IRIG-B or GPS pulse-per-second inputs. Useful for synchronizing multiple video cameras at geographically separated locations.

This Video Encoder/Decoder is optimized for custom applications. It has a built-in keypad for user control of various features, and A/D converters for connection of a joystick or sensors. An expansion card adds functions such as additional video channels, additional serial channels, GPS receiver, dual channel synchro/resolver converters, and PWM motor control. Time input is IRIG-B or GPS.

The GPS-18x is a WAAS enabled, 12 channel GPS receiver. This compact unit is perfect for temporary or mobile applications. It has a 15 foot cable, magnetic/screw base, and includes appropriate connector and programming for V-data equipment.

Price: $175

This external GPS Receiver/Antenna is best for permanent installations. It has a 30 foot cable, pole/screw mount base, and includes appropriate connector and setup.

Price: $350

This is an unregulated 9VDC, 300ma adapter for powering V-data products.

Price: $20

This is a 6 foot cable with tinned leads on one end and a 2.1mm connector on the other for battery power of V-data products. A user supplied 1A in-line fuse is essential to prevent damage due to short circuits when the connector is inserted in a mating jack.

Price: $20

This is the Model GA-29 antenna with 1 inch, 20 TPI pipe mount and 30 foot RG-59 cable with BNC plug for connection to the GTP and other V-data equipment with built-in GPS receivers that don't include the antenna.

Price: $150

This compact, right-angle swivel, quarter-wave helix antenna fastens to the BNC antenna connection on the GTP and other V-data equipment with built-in GPS receivers, providing no-cable convenience for outdoor use.

Price: $120

This is the 5 Hz GPS-18 WAAS enabled, 12 channel GPS receiver from Garmin with appropriate connector and programming for V-data equipment. Has 15 foot cable and magnetic or screw attachment.

Price: $350

This compact adapter fastens to the BNC video input and output connectors on the V-data Video Encoder/Decoder models and adapts them to 4 Pin S-Video mini-din connectors. Separation of chrominance and luminance preserves S-Video quality.

Price: $60

This is a compact 12VDC, 2300mah NiMH Battery Pack with built in battery test and charger. It will charge from a 16V 500ma solar module or a 12VDC 500ma unregulated AC adapter. It is available with either 2.1mm or 2.5mm standard charge input jacks, and a 6 foot cable output with 2.1mm or 2.5mm plug. Dimensions are 3.8W x 5L x 1.5H inches and weight is 1 pound. The output is protected by a 2.5A self-resetting polycrystalline fuse.

Price: $195

This free download software works with the TCR above under products. The V-data Timecode Reader decodes IRIG-B timecode and displays the time on the PC screen. It also allows the PC clock to be synchronized with IRIG-B time and shows the millisecond error between the PC clock and the incoming IRIG-B at any moment. The TCR is optimized for use with the V-data TCG but will also work with generic sources of IRIG-B at nominal 3V peak-peak level. Requires XP, Vista, or Win7 Operating System and a USB port.

Reads VED edgecode from the serial port and converts it to a customizable text format which is logged on the hard drive.

Decodes VED-M edge-code. Can display map of coordinates specified in edge-code.